Encoders Absolute singleturn Sendix F5858
Price on request
€0.00
Tax included
Reference
Sendix F5858
|
|
For real-time communication: Industrial Ethernet encoders with EtherNet/IP interface.
The absolute encoders Singleturn Sendix F5858 / F5878 with EtherNet/IP interface and a resolution of up to 16 bits are designed for time-critical applications. Thanks to their special features, due to the patented Intelligent Scan Technology™, they not only support the performance and availability of your plant, but also make a major contribution to saving time and money.
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type | 6 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface |
| Flange type | Synchro flange / Servo flange Clamping flange Square flange Ø 58.00 mm ❏ 63,50 mm |
| Working temperature | -40 °C ... +80 °C |
| Protection level | IP65 |
| Connection types | M12 connector axial |
| Max. rotational speed | 8.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. | 16 bits singleturn |
| Supply voltage | 10...30 V DC |
| Interfaces | EtherNet/IP |
Latest EtherNet/IP functionality
- Fast, simple commissioning and configuration possible using cyclic services.
- Low RPI time of at least 1 ms - thus the encoder can be used for time-critical applications up to 1000 Hz update frequency.
- Fast start of the encoder after applying the power supply - this increases the system performance.
- Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
- Through the implementation of DLR (Device Level Ring), a single cable break does not cause the plant to come to a standstill.
- Wide temperature range -40°C to +80°C.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
| Ø 19mm | 8.0000.1102.XXXX |
| Ø 15mm | 8.0000.1202.XXXX |
| Ø 25mm | 8.0000.1502.XXXX |
Assembly bell
Fast encoder mounting. Electrical and thermal insulation by glass-fiber reinforced plastic and insulating spring spacer coupling - complete delivery as set.Mounting bell, spring spacer coupling (8.0000.1401.XXXX), 4 DIN 912 M4x12 hexagon socket screws, 3 DIN 912 M4x10 hexagon socket screws, 7 DIN 433.4 washers, 3 mounting attachments (8.0000.4B00.0000), 3 DIN 84 M4x35 cylinder head screws, 3 DIN 934 - M4 hexagon nuts.
| 8.0000.4500.XXYY |
Adapter flange, square, 4 mm
Flange adapter, square. For shaft encoders with clamping flange.Scope of delivery
Flange adapter (aluminum), 3 screws for fastening
Encoders
| 50,0mm x 4mm | 8.0010.2100.0000 |
| 63,5mm x 3mm | 8.0010.2120.0000 |
| 70,0mm x 10mm | 8.0010.2600.0000 |
| 80,0 mm x 4mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
Adapter for converting a clamping flange into a synchro flange.Flange adapter (aluminum), 3 screws for mounting on the encoder.
| Drehgeber 580x/5000 | 8.0010.2160.0000 |
| Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 65mm
With this flange adapter, Kübler encoders of dimension 58 mm can replace other makes of dimension 65 mm with 48 mm pitch circle.Flange adapter (aluminum), 3 screws for mounting on the encoder.
| 8.0010.2230.0000 |
Flange, Ø 90mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.Flange adapter (aluminum), 3 screws for mounting on the encoder.
| 8.0010.2270.0000 |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
| Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
| Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
| Data sheet Accessories shaft encoders |
16 other products in the same category:
×