Encoders Absolute multiturn Sendix 5868
Price on request
€0.00
Tax included
Reference
Sendix 5868
|
|
For real-time communication: Industrial Ethernet encoders with EtherCAT interface.
The absolute encoders Multiturn Sendix 5868 / 5888 with 2nd-generation EtherCAT interface and optical sensors can be used in all applications with EtherCAT technology. The data communication is based on CAN over EtherNet and is ideally suited for real-time applications. These encoders are available with shafts up to a maximum diameter of 10 mm or as blind hollow shafts up to 15 mm.
Mechanical | |
---|---|
Dimension | Ø 58 mm |
Shaft type | 6 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface |
Flange type | Synchro flange / Servo flange Clamping flange Square flange Ø 58.00 mm |
Working temperature | -40 °C ... +85 °C |
Protection level | IP65 IP67 |
Connection types | M12 connector radial |
Max. rotational speed | 9.000 min-1 |
Weight | 540 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. | 16 bits singleturn 12 bits multiturn |
Supply voltage | 10...30 V DC |
Interfaces | EtherCAT |
Reliable
- EtherCAT conformance tested.
- With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
- Use of CoE (CAN over EtherNet).
- Real new position information due to minimum cycle time in DC mode of 62.5 μs.
- Fast, simple, error-free connection with M12 plug.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
Ø 19mm | 8.0000.1102.XXXX |
Ø 15mm | 8.0000.1202.XXXX |
Ø 25mm | 8.0000.1502.XXXX |
Assembly bell
Fast encoder mounting. Electrical and thermal insulation by glass-fiber reinforced plastic and insulating spring spacer coupling - complete delivery as set.Mounting bell, spring spacer coupling (8.0000.1401.XXXX), 4 DIN 912 M4x12 hexagon socket screws, 3 DIN 912 M4x10 hexagon socket screws, 7 DIN 433.4 washers, 3 mounting attachments (8.0000.4B00.0000), 3 DIN 84 M4x35 cylinder head screws, 3 DIN 934 - M4 hexagon nuts.
8.0000.4500.XXYY |
Adapter flange, square, 4 mm
Flange adapter, square. For shaft encoders with clamping flange.Scope of delivery
Flange adapter (aluminum), 3 screws for fastening
Encoders
50,0mm x 4mm | 8.0010.2100.0000 |
63,5mm x 3mm | 8.0010.2120.0000 |
70,0mm x 10mm | 8.0010.2600.0000 |
80,0 mm x 4mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
Adapter for converting a clamping flange into a synchro flange.Flange adapter (aluminum), 3 screws for mounting on the encoder.
Drehgeber 580x/5000 | 8.0010.2160.0000 |
Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 65mm
With this flange adapter, Kübler encoders of dimension 58 mm can replace other makes of dimension 65 mm with 48 mm pitch circle.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2230.0000 |
Flange, Ø 90mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2270.0000 |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
16 other products in the same category:
×