Encoders Absolute multiturn Sendix F3663
Price on request
€0.00
Tax included
Reference
Sendix F3663
|
|
Intelligent Scan Technology™ – powerful and economical at the same time.
The absolute encoders Singleturn Sendix F3663 / F3683 with patented Intelligent Scan Technology™ and SSI or BiSS interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a through hollow shaft up to 8 mm or a blind hollow shaft up to 10 mm is possible. The high-precision optical sensor technology achieves a resolution of up to 17 bit singleturn and up to 24 bit multiturn.
| Mechanical | |
|---|---|
| Dimension | Ø 36 mm |
| Shaft type |
6 mm shaft, with flat surface 8 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface |
| Flange type |
Synchro flange / Servo flange Clamping flange Ø 36.00 mm |
| Working temperature | -40 °C ... +90 °C |
| Protection level |
IP65 IP67 |
| Connection types |
Tangential cable |
| Max. rotational speed |
12.000 min-1 |
| Weight | 200 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. |
2.048 ppr incremental 17 bits singleturn 24 bits multiturn |
| Supply voltage |
5 V DC 10...30 V DC |
| Interfaces |
SSI + 2048 ppr SinCos BiSS |
Reliable and insensitive
- Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
- Reduced number of components ensures insensitivity.
- IP67 protection and wide temperature range from -40°C to +90°C.
- Patented Intelligent Scan Technology™ (all single and multiturn functions on one OptoASIC) - highest reliability, high resolution up to 41 bit, 100% magnetic insensitivity.
- High precision with a data update of the position value ≤ 1 µs.
- High-resolution feedback in real time via SinCos and RS422 incremental outputs.
- Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS up to
10 MHz.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
| Ø 19mm | 8.0000.1102.XXXX |
| Ø 15mm | 8.0000.1202.XXXX |
| Ø 25mm | 8.0000.1502.XXXX |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
| Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
| Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
16 other products in the same category:
×