Encoders Absolute multiturn Sendix 5888
Price on request
€0.00
Tax included
Reference
Sendix 5888
|
|
For real-time communication: Industrial Ethernet encoders with EtherCAT interface.
The absolute encoders Multiturn Sendix 5868 / 5888 with 2nd-generation EtherCAT interface and optical sensors can be used in all applications with EtherCAT technology. The data communication is based on CAN over EtherNet and is ideally suited for real-time applications. These encoders are available with shafts up to a maximum diameter of 10 mm or as blind hollow shafts up to 15 mm.
Mechanical | |
---|---|
Dimension | Ø 58 mm |
Shaft type | 10 mm hollow shaft, blind hole 12 mm hollow shaft, blind hole 14 mm hollow shaft, blind hole 15 mm hollow shaft, blind hole 1/2 " hollow shaft, blind hole 3/8 " hollow shaft, blind hole |
Flange type | Ø 58.00 mm Ø 63.00 mm Ø 65.00 mm Ø 72.00 mm |
Working temperature | -40 °C ... +80 °C |
Protection level | IP65 IP67 |
Connection types | M12 connector radial |
Max. rotational speed | 9.000 min-1 |
Weight | 570 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. | 16 bits singleturn 12 bits multiturn |
Supply voltage | 10...30 V DC |
Interfaces | EtherCAT |
Reliable
- EtherCAT conformance tested.
- With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
- Use of CoE (CAN over EtherNet).
- Real new position information due to minimum cycle time in DC mode of 62.5 μs.
- Fast, simple, error-free connection with M12 plug.
Accessories
Stator coupling, double-winged
For lateral mounting on the encoder flange. For applications with high accuracy requirements.Stator coupling (stainless steel), 4 screws for mounting on the encoder.
8.0010.4D00.0000 |
Spring element, short
For applications with limited axial play, low dynamics, and limited installation space:Spring element (plastic), 1 screw for fastening to the encoder.
8.0010.4H00.0000 |
16 other products in the same category:
×