Encoders Incremental Sendix 5814
Price on request
€0.00
Tax included
Reference
Sendix 5814
|
|
Highly interpolatable – ideal for drive technology.
The incremental encoders Sendix 5814 / 5834 with SinCos interface are preferably used in drive technology.
Due to their very high signal quality, they are ideally suited for further interpolation.
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type | 10 mm shaft, with flat surface |
| Flange type | Clamping flange Ø 58.00 mm |
| Working temperature | -40 °C ... +90 °C |
| Protection level | IP65 |
| Connection types | Radial cable Tangential cable M12 connector radial |
| Max. rotational speed | 12.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. | 2.048 ppr incremental |
| Supply voltage | 5 V DC 10...30 V DC |
| Interfaces | SinCos |
| Options | |
|---|---|
| on request |
|
Powerful
- With incremental SinCos traces.
- Very high signal quality.
- Suitable for extreme applications.
- Shaft and hollow shaft variants.
- Cable and connector variants.
- Different mounting variants available.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
| Ø 19mm | 8.0000.1102.XXXX |
| Ø 15mm | 8.0000.1202.XXXX |
| Ø 25mm | 8.0000.1502.XXXX |
Assembly bell
Fast encoder mounting. Electrical and thermal insulation by glass-fiber reinforced plastic and insulating spring spacer coupling - complete delivery as set.Mounting bell, spring spacer coupling (8.0000.1401.XXXX), 4 DIN 912 M4x12 hexagon socket screws, 3 DIN 912 M4x10 hexagon socket screws, 7 DIN 433.4 washers, 3 mounting attachments (8.0000.4B00.0000), 3 DIN 84 M4x35 cylinder head screws, 3 DIN 934 - M4 hexagon nuts.
| 8.0000.4500.XXYY |
Adapter flange, square, 4 mm
Flange adapter, square. For shaft encoders with clamping flange.Scope of delivery
Flange adapter (aluminum), 3 screws for fastening
Encoders
| 50,0mm x 4mm | 8.0010.2100.0000 |
| 63,5mm x 3mm | 8.0010.2120.0000 |
| 70,0mm x 10mm | 8.0010.2600.0000 |
| 80,0 mm x 4mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
Adapter for converting a clamping flange into a synchro flange.Flange adapter (aluminum), 3 screws for mounting on the encoder.
| Drehgeber 580x/5000 | 8.0010.2160.0000 |
| Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 90mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.Flange adapter (aluminum), 3 screws for mounting on the encoder.
| 8.0010.2270.0000 |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
| Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
| Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
Bearing box
If the encoder is driven by a toothed or sprocket wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. The bearing box equipped with reinforced bearings is ideally suited for these cases. This can be combined with all encoders with 58mm clamping flange and 10x20mm shaft.Bearing box with lock and O-ring, coupling for shaft 10 mm, adapter flange 8.0010.2100.0000, 3 countersunk screws DIN 63 M3x8, 4 cylinder head screws DIN 84 M4x8.
| 8.0010.8200.0004 |
16 other products in the same category:
×