Encoders Absolute multiturn Sendix 5863FS2
Price on request
€0.00
Tax included
Reference
Sendix 5863FS2
|
|
Safe position acquisition up to SIL2/PLd.
The absolute encoders Singleturn Sendix 5863FS2 / 5883FS2 are suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock™ design, the high integration density of the OptoASIC-based components and the stable die-cast housing make them perfect for demanding outdoor applications up to IP67.
Mechanical | |
---|---|
Dimension | Ø 58 mm |
Shaft type |
10 mm shaft, with flat surface 10 mm shaft, feather key |
Flange type |
Clamping flange Ø 58.00 mm |
Working temperature | -40 °C ... +90 °C |
Protection level |
IP65 IP67 |
Connection types |
Axial cable Radial cable M23 connector axial M23 connector radial |
Max. rotational speed |
12.000 min-1 |
Weight | 450 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. |
17 bits singleturn 12 bits multiturn |
Supply voltage |
5 V DC 10...30 V DC |
Interfaces |
SSI + 2048 ppr SinCos BiSS + 2048 ppr SinCos |
Functional safety technology
- Encoders with independent certificate from TÜV.
- Suitable for applications up to SIL2 according to EN 61800-5-2.
- Suitable for applications up to PLd according to EN ISO 13849-1.
- SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
- Certified mechanical mounting and electronics.
- Shaft and hollow shaft variants.
- Cable and connector variants.
- Different mounting variants available.
Accessories
Bellows couplings (FS)
Bellows couplings provide cost-effective connection of the motorand encoder. They are also able to correct any angular errors
between the drive and encoder.
8.0000.15FS.XXXX |
EMC shield terminal
For EMC-compliant installation of the encoder cable.- Mounting on top hat rail
- Shield diameter
8.0000.4G06.0312 (03-12 mm)
8.0000.4G06.0718 (07-18 mm)
- Weight approx. 7.4 g
- Clamp (spring steel, galvanized)
- Foot (spring steel)
8.0000.4G06.0312 | |
8.0000.4G06.0718 |
Adapter flange, square, 4 mm
Flange adapter, square. For shaft encoders with clamping flange.Scope of delivery
Flange adapter (aluminum), 3 screws for fastening
Encoders
50,0mm x 4mm | 8.0010.2100.0000 |
63,5mm x 3mm | 8.0010.2120.0000 |
70,0mm x 10mm | 8.0010.2600.0000 |
80,0 mm x 4mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
Adapter for converting a clamping flange into a synchro flange.Flange adapter (aluminum), 3 screws for mounting on the encoder.
Drehgeber 580x/5000 | 8.0010.2160.0000 |
Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 65mm
With this flange adapter, Kübler encoders of dimension 58 mm can replace other makes of dimension 65 mm with 48 mm pitch circle.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2230.0000 |
Flange, Ø 90mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2270.0000 |
16 other products in the same category:
×