Encoders Incremental Sendix 5000
Price on request
€0.00
Tax included
Reference
Sendix 5000
|
|
The Standard Encoder for automation.
Sendix 5000 / 5020 incremental encoders offer special resistance to vibrations and installation error due to their robust bearing construction using the Safety Lock™ design. The stable die-cast housing, the high protection up to IP67 and the wide temperature range from -40°C to +85°C allow universal use. This family of encoders is subject to continuous technical development and now offers a unique variety of ordering options. Special highlight: The 24one delivery commitment: We manufacture your desired encoder in 24 hours. This free service affords you planning reliability and maximum system availability.
Mechanical | |
---|---|
Dimension | Ø 50 mm |
Shaft type | 6 mm shaft, with flat surface 8 mm shaft, with flat surface 10 mm shaft, with flat surface 11 mm shaft, with flat surface 12 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface |
Flange type | Synchro flange / Servo flange Clamping flange Square flange Euro flange Ø 50.80 mm ❏ 52.30 mm Ø 58.00 mm Ø 63.50 mm ❏ 63,50 mm Ø 115.00 mm |
Working temperature | -40 °C ... +85 °C |
Protection level | IP65 IP66 IP67 |
Connection types | Axial cable Radial cable M23 connector axial M23 connector radial M12 connector axial M12 connector radial MIL connector |
Max. rotational speed | 12.000 min-1 |
Weight | 400 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. | 5.000 ppr incremental |
Supply voltage | 5 V DC 5...30 V DC 10...30 V DC |
Interfaces | Push-pull TTL / RS422 Open Collector |
Options | |
---|---|
on request |
|
Robust performance
- Increased resistance to vibrations and installation error, avoidance of machine downtime and repairs due to robust bearing construction using the Safety Lock™ design.
- Remains leak-free even in rough everyday use, offers high safety against field failures and is suitable for outdoor use thanks to a stable die-cast housing and protection up to IP67.
- Captive clamping ring for hollow shaft encoders.
- Wide temperature range -40°C to +85°C.
- High shock resistance.
- Higher vibration resistance.
- IP66 and IP67 protection in one version.
- The right connection technology for every application. Cable connection, M23, M12 and MIL plug connection.
- Reliable installation in various mounting situations: Extensive and proven fastening options.
- Compatible with all current US and European standards.
- Max. 5,000 pulses / revolution.
- Double the standard pulse numbers.
- Variants with plug on the cable - for error-free electrical connection to your control system.
- Additional connector variants (M12 / 5-pin, Sub-D).
- Additional standard cable lengths.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
Ø 19mm | 8.0000.1102.XXXX |
Ø 15mm | 8.0000.1202.XXXX |
Ø 25mm | 8.0000.1502.XXXX |
Assembly bell
Fast encoder mounting. Electrical and thermal insulation by glass-fiber reinforced plastic and insulating spring spacer coupling - complete delivery as set.Mounting bell, spring spacer coupling (8.0000.1401.XXXX), 4 DIN 912 M4x12 hexagon socket screws, 3 DIN 912 M4x10 hexagon socket screws, 7 DIN 433.4 washers, 3 mounting attachments (8.0000.4B00.0000), 3 DIN 84 M4x35 cylinder head screws, 3 DIN 934 - M4 hexagon nuts.
8.0000.4500.XXYY |
Adapter flange, square, 4 mm
Flange adapter, square. For shaft encoders with clamping flange.Scope of delivery
Flange adapter (aluminum), 3 screws for fastening
Encoders
50,0mm x 4mm | 8.0010.2100.0000 |
63,5mm x 3mm | 8.0010.2120.0000 |
70,0mm x 10mm | 8.0010.2600.0000 |
80,0 mm x 4mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
Adapter for converting a clamping flange into a synchro flange.Flange adapter (aluminum), 3 screws for mounting on the encoder.
Drehgeber 580x/5000 | 8.0010.2160.0000 |
Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 65mm
With this flange adapter, Kübler encoders of dimension 58 mm can replace other makes of dimension 65 mm with 48 mm pitch circle.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2230.0000 |
Flange, Ø 90mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.Flange adapter (aluminum), 3 screws for mounting on the encoder.
8.0010.2270.0000 |
16 other products in the same category:
×