Encoders Absolute singleturn Sendix 3651
Price on request
€0.00
Tax included
Reference
Sendix 3651
|
|
Suitable for the toughest environments. Encoders with E1 approval.
The absolute encoders Singleturn Sendix 3651 / 3671 with analog interface and magnetic sensors are particularly flexible due to their versatile interfaces and measuring ranges. A green and red LED as a reference point and error display facilitate both installation and error diagnosis. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, the Sendix are suitable for even the most demanding outdoor applications. These encoders are e1 approved by the Federal Motor Transport Authority (KBA).
| Mechanical | |
|---|---|
| Dimension | Ø 36 mm |
| Shaft type |
6 mm shaft, with flat surface 8 mm shaft, with flat surface 1/4 " shaft, with flat surface |
| Flange type |
Ø 36.00 mm |
| Working temperature | -40 °C ... +85 °C |
| Protection level |
IP67 IP69k |
| Connection types |
Axial cable Radial cable M12 connector axial M12 connector radial |
| Max. rotational speed |
6.000 min-1 |
| Weight | 200 g |
| Electrical | |
|---|---|
| Scanning | magnetic |
| Resolution max. |
12 bits singleturn |
| Supply voltage |
10...30 V DC 15...30 V DC |
| Interfaces |
Analog 0–10 V |
Safe applications
- Contactless measuring system for a wear-free and durable application.
- Stable die-cast housing and protection up to IP69k for particular leak resistance.
- High shock and vibration resistance for particular resilience.
- Outer diameter of only 36 mm.
- The hollow shaft version accommodates a blind hollow shaft of up to 10 mm, which can be fastened individually - via torque brackets or stator coupling.
- 360° resolved into 4096 different positions.
- For use in 12 V or 24 V automotive wiring systems.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
| Ø 19mm | 8.0000.1102.XXXX |
| Ø 15mm | 8.0000.1202.XXXX |
| Ø 25mm | 8.0000.1502.XXXX |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
| Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
| Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
16 other products in the same category:
×