Encoders Incremental Sendix KIH40
Price on request
€0.00
Tax included
Reference
Sendix KIH40
|
|
The economical sensor solution.
The Sendix KIS40 / KIH40 incremental compact encoders with optical sensors are designed for maximum economy and are available with a resolution of up to 2500 pulses per revolution. Special details from the sophisticated Sendix technology can be found in these encoders. This results in a special resistance to vibrations and installation errors. It sets new standards in cost-sensitive applications. The wide performance range opens up many fields of application and is therefore particularly suitable for narrow installation spaces as well as smaller machines and devices.
Mechanical | |
---|---|
Dimension | Ø 40 mm |
Shaft type |
8 mm hollow shaft, blind hole 1/4 " hollow shaft, blind hole |
Flange type |
Ø 40.00 mm Ø 46.00 mm |
Working temperature | -20 °C ... +70 °C |
Protection level |
IP64 |
Connection types |
Axial cable Radial cable |
Max. rotational speed |
4.500 min-1 |
Weight | 170 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. |
2.500 ppr incremental |
Supply voltage |
5 V DC 10...30 V DC |
Interfaces |
Push-pull TTL / RS422 Open Collector |
Options | |
---|---|
on request |
|
Compact and robust
- Only 40 mm outer diameter.
- Ideally suited for limited installation space.
- Robust bearing design in safety Lock™ design.
- Safe commissioning: Reverse polarity protection and short-circuit proof.
- Maximum resolution 2500 pulses per revolution.
- Supply voltage 5 V DC or 10 to 30 V DC.
- Push-pull, RS422 or Open collector.
- Cable radial or axial.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
Ø 19mm | 8.0000.1102.XXXX |
Ø 15mm | 8.0000.1202.XXXX |
Ø 25mm | 8.0000.1502.XXXX |
Stator coupling, double-winged
For front mounting on encoder flange. For applications with axial play and radial play with high dynamics.Stator coupling (stainless steel), 2 screws for mounting on the encoder.
8.0010.4C00.0000 |
Spring element, short
For applications with limited axial play, low dynamics, and limited installation space:Spring element (plastic), 1 screw for fastening to the encoder.
8.0010.4H00.0000 |
16 other products in the same category:
×