Encoders Incremental 3610
Price on request
€0.00
Tax included
Reference
3610
|
|
Suitable for tight installation spaces.
The incremental compact encoders 3610 / 3620 with optical sensors are available up to a resolution of 2500 pulses per revolution.
The versions with through hollow shaft are designed for diameters up to 8 mm.
Mechanical | |
---|---|
Dimension | Ø 36 mm |
Shaft type | 4 mm shaft, round 5 mm shaft, round 6 mm shaft, with flat surface 1/4 " shaft, with flat surface |
Flange type | Synchro flange / Servo flange Clamping flange Ø 36.00 mm Ø 36.50 mm |
Working temperature | -20 °C ... +85 °C |
Protection level | IP50 IP64 IP65 |
Connection types | Axial cable Radial cable M12 connector axial M12 connector radial |
Max. rotational speed | 12.000 min-1 |
Weight | 80 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. | 2.500 ppr incremental |
Supply voltage | 5 V DC 5...18 V DC 8...30 V DC |
Interfaces | Push-pull TTL / RS422 |
Options | |
---|---|
on request |
|
Compact
- Only 36 mm and 38 mm outside diameter.
- Continuous hollow shaft up to 8 mm.
- Ideally suited for limited installation space.
- Available with cable outlet or M12 plug.
- Maximum resolution 2500 pulses per revolution.
- Supply voltage 5 to 18 V DC or 8 to 30 V DC.
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Bellows coupling (stainless steel).
Ø 19mm | 8.0000.1102.XXXX |
Ø 15mm | 8.0000.1202.XXXX |
Ø 25mm | 8.0000.1502.XXXX |
Fastening eccentrics
Suitable for Kübler encoders with synchro flangeMaterial ACu Zn 39 Pb 3, surface galv. Ni
Scope of delivery:
3 attachments, 3 screws
Drehgeber 5000 5803 5804 5805 5853 5858 5863 5868 F5863 F5868 5850 5852 7053 7058 7063 7068 | 8.0010.4100.0000 |
Drehgeber 3610 3651 M3658 F3653 F3658 F3663 F3668 M3668 | 8.0010.4200.0000 |
16 other products in the same category:
×