NT Swinghandle RS PrC Stainless Steel
Price on request
€0.00
Tax included
Reference
7-066
- Flush design.
- Extremly narrow gap.
- The flush design prevents this swinghandle being used as climbing support.
- Locking cylinder fitted in the dish and protected against being forced through.
- Bolted internal cap is made of stainless steel.
- IP65 according to DIN EN 60529.
- 135° swing.
- Stroke 35 mm (1.378) by 3-point cam adapter 45°.
- RH / LH application.
- Cylinder cover optional screw down.
Materials
- Swing handle, dish, cap, locking bolt and rotating disk : AISI 316
- Cap sealing and o-ring: NBR
- Washer: PTFE- Teflon
- Spring: AISI 301
- Locking bolt: stainless steel AISI 316
- Screws, grooved pin, pin with axial knurl and nut: stainless steel
Remarks
(S) Door-thickness 1.5 - 2.5mm
Swinghandle for profile cylinder
| Part Number | Version | Stroke | Installation type | ||
|---|---|---|---|---|---|
| a) | 307-9302.00-00000 | 35 mm | screw-on | ||
| b) | 307-9305.00-00000 | cover screw down | 35 mm | screw-on |
Accessories
- f1)1-181.01 Adapter zinc die for Round Rods Ø8mm / Ø10mm
- f)1-181 Adapter PA for Round Rods Ø8mm
- e)7-106 Round Rods Stainless Steel
- c)7-105 Cams L35/45 Stainless Steel
- d)7-106.01 3-Point Cam Adapter 45° Stainless Steel
- g)200-3623.51-00000 Rod guide
- g)200-3625.51-00000 Rod guide
- 211-9004.00-00000 DIRAK Profile-cylinder
- 211-9003.00-00000 DIRAK Profile-cylinder
16 other products in the same category:
×