DST Swinghandle RS PrC for Profile-Cylinder
Price on request
€0.00
Tax included
Reference
2-090dst
- Swinghandle with pull-and-swing handle for profile-cylinders to DIN 18252.
- Tool-less installation.
- a) 90° for RH doors with counter-clockwise opening.
- b) 90° for LH doors with clockwise opening.
- c) 180° opening.
- The rotation stop prevents a damaging over-rotation of cam / 3-point cam.
- IP65 according to DIN EN 60529 will be achieved by cap and o-ring.
Materials
- Swinghandle, dish, cover and cap: PA6, black
- O-Rings: NBR Perbunan
- Hexagon nut and washer: steel, zinc plated
- Shaft: brass, untreated
- Snap wedges: sintered steel
- Stop: zinc die, untreated
Remarks
1. Guide swinghandle with pre-assembled cam through upper cutout.
2. Hook-in the lower part of the swinghandle and clip it in at the top.
3. Press cap on.
Swinghandle with dust cover
Part Number | Clamping range (S) | Stop | Securable | Installation type | ||
---|---|---|---|---|---|---|
a) | 407-9505.00-00015 | 1.3 - 2.0 mm | RH, 90° | Yes | tool-less | |
a) | 407-9505.00-00018 | 1.5 - 2.2 mm | RH, 90° | Yes | tool-less | |
a) | 407-9505.00-00020 | 1.8 - 2.5 mm | RH, 90° | Yes | tool-less | |
b) | 407-9507.00-00015 | 1.3 - 2.0 mm | LH, 90° | Yes | tool-less | |
b) | 407-9507.00-00018 | 1.5 - 2.2 mm | LH, 90° | Yes | tool-less | |
b) | 407-9507.00-00020 | 1.8 - 2.5 mm | LH, 90° | Yes | tool-less | |
c) | 407-9509.00-00018 | 1.5 - 2.2 mm | RH/LH, 90° | Yes | tool-less | |
c) | 407-9509.00-00020 | 1.8 - 2.5 mm | RH/LH, 90° | Yes | tool-less | |
c) | 407-9509.00-00015 | 1.3 - 2.0 mm | RH/LH, 90° | Yes | tool-less |
Swinghandle without dust cover
Part Number | Clamping range (S) | Stop | Installation type | ||
---|---|---|---|---|---|
a) | 407-9506.00-00015 | 1.3 - 2.0 mm | RH, 90° | tool-less | |
a) | 407-9506.00-00018 | 1.5 - 2.2 mm | RH, 90° | tool-less | |
a) | 407-9506.00-00020 | 1.8 - 2.5 mm | RH, 90° | tool-less | |
b) | 407-9508.00-00015 | 1.3 - 2.0 mm | LH, 90° | tool-less | |
b) | 407-9508.00-00018 | 1.5 - 2.2 mm | LH, 90° | tool-less | |
b) | 407-9508.00-00020 | 1.8 - 2.5 mm | LH, 90° | tool-less | |
c) | 407-9510.00-00015 | 1.3 - 2.0 mm | RH/LH, 90° | tool-less | |
c) | 407-9510.00-00018 | 1.5 - 2.2 mm | RH/LH, 90° | tool-less | |
c) | 407-9510.00-00020 | 1.8 - 2.5 mm | RH/LH, 90° | tool-less |
Accessories
- d)2-140 Profile-Cylinder DIN 18252
- 2-091 Sliding Cap
- i)1-193 Rod Guide RS
- i)1-190 Rod Guides RS
- g)1-181.01 Adapter zinc die for Round Rods Ø8mm / Ø10mm
- g)1-181 Adapter PA for Round Rods Ø8mm
- h)1-170 Round Rods with Eye
- h)1-180 Round Rods for Adapter
- f)2-151 2-, 3- and 4-Point Cam Adapter
- f)2-150 3-Point Cam
- f)2-151.04 3-Point Cam Adapter
16 other products in the same category:
×