Hinge Pr05 180°
Price on request
€0.00
Tax included
Reference
4-183
- 180° Hinge for surface mounted doors for adjacent cabinets.
- Door is lift-off.
- Door-bending 25mm.
- RH and LH version.
- 180° Opening angle.
- With M6 threaded stubs for fastening from inside, or Ø6.4mm countersunk holes for fastening from outside.
- The optional notch in the bending (dimension 55) is being concealed by the 60mm wide frame-part.
Materials
-
a) and b)
- Door-part and frame-part: zinc die, black or chrome plated
- Pin: stainless steel
- Washer: brass
- Door-part: zinc die, black
- Frame-part: steel, black
- Pin: stainless steel
- Washer: stainless steel
Remarks
(S) Door-thickness up to 4mm
1. washer fixed
2. possible notching in the door for a gap of approx. 1-2mm between door and frame.
3. 180° Opening angle if hinges are installed on the right and on the left.
4. the max. torque for the door-part screws is 6Nm.
Hinge, frame- and door-part zinc die
| Part Number | Version | Surface | Frame-part | Pin version | Installation type | ||
|---|---|---|---|---|---|---|---|
| a) | 212-9042.00-00000 | RH version | chrome plated | with M6 threaded stubs | pressed in | screw-on | |
| b) | 212-9043.00-00000 | RH version | chrome plated | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on | |
| a) | 212-9044.00-00000 | LH version | chrome plated | with M6 threaded stubs | pressed in | screw-on | |
| b) | 212-9045.00-00000 | LH version | chrome plated | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on | |
| a) | 212-9046.00-00000 | RH version | black | with M6 threaded stubs | pressed in | screw-on | |
| b) | 212-9047.00-00000 | RH version | black | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on | |
| a) | 212-9048.00-00000 | LH version | black | with M6 threaded stubs | pressed in | screw-on | |
| b) | 212-9049.00-00000 | LH version | black | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on |
Hinge, frame-part steel, door-part zinc die
| Part Number | Version | Surface | Frame-part | Pin version | Installation type | ||
|---|---|---|---|---|---|---|---|
| b1) | 212-9082.00-00000 | RH version | black | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on | |
| b1) | 212-9083.00-00000 | LH version | black | with countersunk holes Ø6.4mm for M6 | pressed in | screw-on |
16 other products in the same category:
×