DST Hinge Pr05 180°
Price on request
€0.00
Tax included
Reference
4-182-02dst
- For surface mounted doors.
- Hinge partly visible.
- Door bending 25mm.
- Frame-part snap-in, tool-less.
- Door-part screw-on.
- Due to an enlarged oblong hole, the doors are easy to lift-off.
- By an identical hole pattern in the frame the hinges can be replaced by dual hooks of product system 3-910DST.
- IP65 according to DIN EN 60529 by using the o-ring 200-1005.00-02420 (please order separately).
- 180° opening angle if hinges are installed on the right or on the left.
140° opening angle if hinges are installed on the right and on the left.
Materials
- Frame-part and door-part: zinc die, black
- Snap wedges: sintered metal, coated
- Pin ø6x15: stainless steel
- Pin ø6x50: steel, zinc plated
- Washers: brass, nickel plated
- Spring washers and socket cylinder screws: steel, zinc plated
Remarks
1. At a gap dimension of 1mm the notch heigth is 7mm. Depending on the gap size the height of the notch differs.
2. Two socket cylinder screws M6x10 DIN 7984 and 2 spring washers DIN 7980 are included.
Hinge
Part Number | Clamping range (S) | Pin version | Installation type | |
---|---|---|---|---|
412-9002.00-00015 | 1.2 - 1.7 mm | pressed in | tool-less / screw-on | |
412-9002.00-00020 | 1.7 - 2.2 mm | pressed in | tool-less / screw-on | |
412-9002.00-00025 | 2.2 - 2.7 mm | pressed in | tool-less / screw-on | |
412-9002.00-00030 | 2.7 - 3.2 mm | pressed in | tool-less / screw-on | |
412-9002.00-00035 | 3.2 - 3.7 mm | pressed in | tool-less / screw-on |
Function extension
- 200-1005.00-02420 O-ring 24 x 2.0mm
Accessories
- 292-0701.15-01530 Reinforcement plate for cutout
- 292-0402.00-03014 Cutout-cover
- 292-0301.15-00000 Tool for uninstallation
- 292-0306.80-02530 Tool for uninstallation
16 other products in the same category:
×