DST Captive Fastener □9.5
Price on request
€0.00
Tax included
Reference
1-041-06dst
- Captive Fastener with DIRAK-SNAP-Technology for joining of flat metal sheets and securely latching doors and covers.
- Meets machinery directive 2006/42EC. After pre-assembly no losing, dropping or misplacing possible.
- Held securely in the cutout.
- Seismic-proof according to GR-63-CORE, Issue 4.
- Vibration-proof according to DIN EN 61373.
- Operation by Phillips H2. Opening by a ¼ turn of the insert.
- One-piece.
Materials
- Housing: zinc die, untreated
- SNAP wedges: sintered steel, zinc plated
- Insert: aluminum, hardened
- Springs: spring steel
Remarks
Removal: by turning the screwdriver counterclockwiese, the SNAP wedges (3.) are retracted. The leaf spring (1.) pushes the Fastener out of the rear panel, however, the U-shaped spring (2.) holds the Fastener captive in the front panel. (4.) Cutout in the rear panel can also be an ablong hole for tolerance adjustment. (5.) Cutout front panel.
The (S) dimension indicates the total thickness of the sheet metal panels.
Fastener
| Part Number | Clamping range (S) | Dimension X | Insert | Installation type | ||
|---|---|---|---|---|---|---|
| a) | 294-9112.00-00017 | 1.5 - 2.0 mm | 11 mm | Phillips H2 | tool-less | |
| a) | 294-9112.00-00026 | 2.5 - 2.8 mm | 11 mm | Phillips H2 | tool-less | |
| a) | 294-9112.00-00030 | 2.9 - 3.2 mm | 11 mm | Phillips H2 | tool-less | |
| a) | 294-9112.00-00034 | 3.3 - 3.6 mm | 11 mm | Phillips H2 | tool-less | |
| a) | 294-9112.00-00042 | 4.1 - 4.4 mm | 11 mm | Phillips H2 | tool-less | |
| b) | 294-9118.00-00037 | 3.5 - 4.0 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9118.00-00046 | 4.5 - 4.8 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9118.00-00050 | 4.9 - 5.2 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9118.00-00054 | 5.3 - 5.6 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9118.00-00062 | 6.1 - 6.4 mm | 13 mm | Phillips H2 | tool-less |
Added to wish list
16 other products in the same category:
×