DST Fastener □9.5 without Leaf Spring
Price on request
€0.00
Tax included
Reference
1-041-04dst
- Fastener with DIRAK-SNAP-Technology for joining sheet metal panels.
- For cutout □9.5.
- Tool-less installation.
- Sheet metal panels are easily joined by manually pressing the Fastener through the panel cutout.
- This Fastener can be disengaged from the front of the panel using a Phillips H2 screwdriver.
- One piece.
- Vibration-proof.
- Delivery time on request!
Materials
- Housing: zinc die, untreated
- SNAP wedges: sintered steel, zinc plated
- Insert: aluminum, hardened
Remarks
Removal: By turning the screwdriver counterclockwise, the SNAP wedges (1.) are retracted. The leaf spring pushes the fastener out of rear panel, however, the U-shaped spring holds the fastener captive in the front panel. (3.) Cutout in the rear panel can also be an oblong hole for tolerance adjustment. (2.) Cutout front panel. The (S) Dimension indicates the total thickness of the sheet metal panels.
Fastener without Leaf Spring
| Part Number | Clamping range (S) | Dimension X | Insert | Installation type | ||
|---|---|---|---|---|---|---|
| a) | 294-9114.00-00031 | 3.0 - 3.3 mm | 11 mm | Phillips H2 | tool-less | |
| a) | 294-9114.00-00039 | 3.8 - 4.1 mm | 11 mm | Phillips H2 | tool-less | |
| b) | 294-9120.00-00042 | 4.0 - 4.5 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9120.00-00051 | 5.0 - 5.3 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9120.00-00055 | 5.4 - 5.7 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9120.00-00059 | 5.8 - 6.1 mm | 13 mm | Phillips H2 | tool-less | |
| b) | 294-9120.00-00067 | 6.6 - 6.9 mm | 13 mm | Phillips H2 | tool-less |
16 other products in the same category:
×