Dual-function display electronic Codix 54P
Price on request
€0.00
Tax included
Reference
Codix 54P
|
|
Position display with separate tachometer, scalable.
The Codix 54P is a voltage supplied pulse counter / position indicator with 4 counter input types and separate tachometer. With separate input, for fast and slow counting pulses, with 6-digit LED display for NPN, PNP input signals.
| Mechanical | |
|---|---|
| Model | Dual-function device electronic |
| Functions |
Pulse counter Position displays without limit values Tachometer without limitvalues Dual-function display |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 150 g |
| Reset |
electronic |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Supply voltage |
100 - 240 (± 10%) V AC 10...30 V DC |
| Signal input |
NPN PNP |
Powerful
- Fast counter and frequency input, input frequency max. 30 kHz
- Robust housing - IP65 protection
- Very bright LED display, 14 mm high, 6 digits
- Exact and highly accurate frequency measurement method (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
- Short start-up time - Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start
- Large keys (can also be operated with gloves)
- Program.
- Simple and uniform programming and operation through plain text programming
- Access to programming also during operation with safety query
- Display switching by pressing the right button
- Individually adjustable scaling Multiplication and division factor (0.0001 to 99.9999) to display the corresponding units in e.g. position in 1/10 mm and speed in rpm/.
- Separate factors and inputs for frequency and pulse counting
- 4 different counter input types for the position display:
2-channel input for acquisition of counting direction, differential or addition mode, phase discriminator with single, double, or quadruple evaluation. 1 separate input for speed and speed, display in 1/min or 1/sec
- AC or DC supply with sensor power supply
- Inputs: As an alternative to the HTL inputs, devices with a 5 V DC input level are also available for use as a parallel display to the PLC.
Accessories
16 other products in the same category:
×