Dual-function display electronic Codix 52P
Price on request
€0.00
Tax included
Reference
Codix 52P
|
|
Position display with separate tachometer, scalable.
The Codix 52P is a voltage supplied pulse/ counter position indicator with 4 counter input types and separate tachometer. With separate input, for fast and slow counting pulses, with 6-digit LED display for NPN, PNP input signals.
| Mechanical | |
|---|---|
| Model | Dual-function device electronic |
| Functions |
Pulse counter Position displays without limit values Tachometer without limitvalues Dual-function display |
| Dimension 1 |
48 x 24 mm | 45 x 22 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 50 g |
| Reset |
electronic |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Supply voltage |
10...30 V DC |
| Signal input |
NPN PNP |
Powerful
- Fast counter and frequency input, input frequency max. 30 kHz
- Robust housing - IP65 protection
- Very bright LED display, 8 mm high, 6 digits
- Exact and highly accurate frequency measurement method (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
- Short start-up time - Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start
- Large keys (can also be operated with gloves)
- Programming
- Simple and uniform programming and operation through plain text programming
- Access to programming also during operation with safety query
- Display switching by pressing the right button
- Individually adjustable scaling
Multiplication and division factor (0.0001 to 99.9999) to display the corresponding units in e.g. position in 1/10 mm and speed in rpm/.
- Separate factors and inputs for frequency and pulse counting
- 4 different counter input types for the position display:
2-channel input for acquisition of counting direction, differential or addition mode, phase discriminator with single, double, or quadruple evaluation. 1 separate input for speed and speed, display in 1/min or 1/sec
- Inputs: As an alternative to the HTL inputs, devices with 4 to 30 V DC input level available for use as parallel display to PLC.
Accessories
Sealing cover K1
Flexible sealing cap for front frame F1B and adapter front frame N003001 made of soft PVC with painted sheet steel frame and mounting screws. IP65 protection according to DIN 40050 when installed. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Sealing cap (PVC) with sheet steel frame, 2 mounting screws M4x15.
| Grau | G.008.300 |
| Schwarz | G.008.301 |
Enclosure, 24x48
For the installation of all counters, timers, process devices with DIN dimensions 24x48mm or 50x25mm. Cutout 25x50mm. For snap-on mounting on 35mm DIN top hat rail.Meter holder (chrome-plated sheet steel), DIN hat-rail adapter (fiber-reinforced polyamide).
| G.300.004 |
Transparent cover, lockable
Screw-on transparent cover for front frame F1B and adapter front frame N003001, 1 DV, lockable for dimension F1. With seal over M4 mounting screws with own frame. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Transparent cover, seal, 2 mounting screws.
| N.003.002 |
16 other products in the same category:
×