Indexing Plunger with Rest Position
Price on request
€0.00
Tax included
Reference
6-212
- Indexing plunger with spring-loaded handle and rest position.
- Enables fixing of covers and flaps in defined positions.
- The spring-loaded handle is fixed by pulling and then turning 90°.
- Avoids linear movement between two parts.
- Installed using a simple push into the cutout.
- Flexible use for material thicknesses of 1 to 8mm.
- Available with various head heights: 2, 3 and 4mm for different gap dimensions.
- Can also be used as a pin hinge.
Materials
- Housing and distance ring: PA, black
- Handle / cap: PA, green
Remarks
1. Possible countersunk in the cutout. As a result, the gap between two components and the thickness of the material can be adjusted.
Indexing Plunger with Rest Position
Part Number | Head height B | at a min. - max. clamping range (S) without distance ring the plunger pin height is Cs | at a min. - max. clamping range (S) without distance ring the plunger pin height is D | total Length A | Cutout housing | Cutout pin | Pin diameter Ø | |
---|---|---|---|---|---|---|---|---|
245-9317.00-00020 | 2 mm | 7.8 - 4.8 mm | 8.8 - 4.8 mm | 33.4 mm | Ø 9.5 x 8.2 mm | Ø 6,1 + 0,1 mm | 6 mm | |
245-9317.00-00030 | 3 mm | 8.8 - 5.8mm | 9.8 - 5.8mm | 35.4 mm | Ø 9.5 x 8.2 mm | Ø 6,1 + 0,1 mm | 6 mm | |
245-9317.00-00040 | 4 mm | 7.8 - 4.8 mm | 8.8 - 4.8 mm | 35.4 mm | Ø 9.5 x 8.2 mm | Ø 6,1 + 0,1 mm | 6 mm |
16 other products in the same category:
×