DST Corner Hinge Pr04 180° Stainless steel
Price on request
€0.00
Tax included
Reference
7-285dst
- Elegant corner hinge for surface mounted doors.
- Hinge visible.
- Lift-off.
- RH / LH application.
- 180° Opening angle.
- The O-ring for IP65 DIN EN 60529 is included.
- Version a) for tool-less installation. Assembly via a simple clip-in into the cutout.
- Version b) for screw-on / clip-in installation. One hinge half is fixed by screws M6, the other hinge half will be assembled via a simple clip-in into the cutout.
Materials
- Corner hinge: AISI 316
- Pin: AISI 303
- Snap wedges: stainless steel
- O-Ring: NBR/ black
Remarks
Other versions DST/screw-on on request. Please contact DIRAK.
Corner Hinge
| Part Number | Clamping range (S) | Pin version | Installation type | ||
|---|---|---|---|---|---|
| a) | 417-9015.82-00012 | 0.8 - 1.5 mm | pressed in | tool-less | |
| a) | 417-9015.82-00016 | 1.3 - 2.0 mm | pressed in | tool-less | |
| a) | 417-9015.82-00021 | 1.8 - 2.5 mm | pressed in | tool-less | |
| a) | 417-9015.82-00026 | 2.3 - 3.0 mm | pressed in | tool-less | |
| b) | 417-9017.82-00012 | 0.8 - 1.5 mm | pressed in | tool-less / screw-on | |
| b) | 417-9017.82-00016 | 1.3 - 2.0 mm | pressed in | tool-less / screw-on | |
| b) | 417-9017.82-00021 | 1.8 - 2.5 mm | pressed in | tool-less / screw-on | |
| b) | 417-9017.82-00026 | 2.3 - 3.0 mm | pressed in | tool-less / screw-on |
Accessories
- 292-0702.15-01030 Reinforcement plate for cutout
- 292-0401.00-03007 Cutout-cover
- 292-0306.80-02530 Tool for uninstallation
16 other products in the same category:
×