Hour meter electronic Codix 523
|
|
Hour meters / timers with 4 start input types.
The Codix 523 is a power-supplied time counter, hour meter or short time meter with 4 start input types and individually adjustable time base. The 6-digit LED display shows the NPN, PNP input signals for pulse width or period duration measurement.
Mechanical | |
---|---|
Model | electronic |
Function |
Hour meters / timers |
Dimension 1 |
48 x 24 mm | 45 x 22 mm |
Protection level |
IP65 |
Working temperature | -20 °C ... +65 °C |
Weight | 50 g |
Reset |
electronic |
(1) Front panel size | Panel cut-out
Electrical | |
---|---|
Supply voltage |
10...30 V DC |
Signal input |
NPN PNP |
- High accuracy due to quartz time base
- Robust housing - IP65 protection
- Very bright LED display, 8 mm high
- Individually adjustable scaling
- Hours, minutes or seconds, through the decimal point adjustable even more precisely to max. 3 decimal places
- Smallest achievable resolution: Milliseconds
- Time base in hours (minutes and seconds as real-time display)
- Short start-up time Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start
- Individually adjustable start/stop function
4 different measuring principles can be implemented via 2 Start/Stop inputs, e.g. pulse width measurement active or passive, period duration measurement with one input or with separate inputs. User-friendly and universal
- Large keys - changeover by pressing one of the two keys (can also be operated with gloves)
- Programming software
- Simple and uniform programming and operation through plain text programming
- Access to programming also during operation with safety query
- Manual or electrical reset
Tamper-proof thanks to lockable reset function
- Freely programmable set value
Start time at which the time counting starts
- As an alternative to the HTL inputs, devices with
4 to 30 V DC input level available for use as parallel display to PLC
- Optional with output: 1 Hz cycle with active time measurement
Accessories
Sealing cover K1
Flexible sealing cap for front frame F1B and adapter front frame N003001 made of soft PVC with painted sheet steel frame and mounting screws. IP65 protection according to DIN 40050 when installed. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Sealing cap (PVC) with sheet steel frame, 2 mounting screws M4x15.
Grau | G.008.300 |
Schwarz | G.008.301 |
Enclosure, 24x48
For the installation of all counters, timers, process devices with DIN dimensions 24x48mm or 50x25mm. Cutout 25x50mm. For snap-on mounting on 35mm DIN top hat rail.Meter holder (chrome-plated sheet steel), DIN hat-rail adapter (fiber-reinforced polyamide).
G.300.004 |
Transparent cover, lockable
Screw-on transparent cover for front frame F1B and adapter front frame N003001, 1 DV, lockable for dimension F1. With seal over M4 mounting screws with own frame. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Transparent cover, seal, 2 mounting screws.
N.003.002 |