Compression Latch
Price on request
€0.00
Tax included
Reference
1-205
- Compression latch in two different versions.
- Compression 7mm.
- Version A: the H-dimension can be adjusted on the square threaded rod with the included nuts by +/- 20mm.
Use of cams c). - Version B: the H-dimension can be varied via the cranking of the cams.
Use of cams d). - The cams can be installed in four positions by rotating them 90°.
- IP65 according to DIN EN 60529 with: flat seal 200-0902.
Materials
- Compression latch: zinc die, black or zinc plated
- Square threaded rod, shaft and cams: steel, zinc plated
Remarks
Installation with blind rivets or screws.
1. Compression 7mm
2. Open position
3. Cam behind the locking surface
4. By folding of the handle the cam is tightened at the locking surface
5. Lockable with padlock
Compression Latch, zinc die, black, version a)
Part Number | Door-thickness (S) | variable H-dimension | Installation type | ||
---|---|---|---|---|---|
a) | 200-9935.00-00000 | max. 50 mm | 30 - 60 mm | screw-on | |
a) | 200-9936.00-00000 | max. 70 mm | 50 - 80 mm | screw-on | |
a) | 200-9937.00-00000 | max. 90 mm | 70 - 100 mm | screw-on | |
a) | 200-9938.00-00000 | max. 110 mm | 90 - 120 mm | screw-on |
Compression Latch, zinc die, zinc plated, version a)
Part Number | Door-thickness (S) | variable H-dimension | Installation type | ||
---|---|---|---|---|---|
a) | 200-9939.00-00000 | max. 50 mm | 30 - 60 mm | screw-on | |
a) | 200-9940.00-00000 | max. 70 mm | 50 - 80 mm | screw-on | |
a) | 200-9941.00-00000 | max. 90 mm | 70 - 100 mm | screw-on | |
a) | 200-9942.00-00000 | max. 110 mm | 90 - 120 mm | screw-on |
Compression Latch, zinc die, black, version b)
Part Number | Door-thickness (S) | variable H-dimension | Installation type | ||
---|---|---|---|---|---|
b) | 200-9916.00-00000 | max. 42 mm | 32 - 54 mm | screw-on | |
b) | 200-9918.00-00000 | max. 62 mm | 52 - 74 mm | screw-on | |
b) | 200-9920.00-00000 | max. 82 mm | 72 - 94 mm | screw-on | |
b) | 200-9922.00-00000 | max. 102 mm | 92 - 114 mm | screw-on |
Compression Latch, zinc die, zinc plated, version b)
Part Number | Door-thickness (S) | variable H-dimension | Installation type | ||
---|---|---|---|---|---|
b) | 200-9926.00-00000 | max. 42 mm | 32 - 54 mm | screw-on | |
b) | 200-9928.00-00000 | max. 62 mm | 52 - 74 mm | screw-on | |
b) | 200-9930.00-00000 | max. 82 mm | 72 - 94 mm | screw-on | |
b) | 200-9932.00-00000 | max. 102 mm | 92 - 114 mm | screw-on |
Cam, straight
Part Number | Length | ||
---|---|---|---|
c) | 200-5508.00-00045 | 45 mm | |
c) | 200-5508.00-00060 | 60 mm | |
c) | 200-5508.00-00065 | 65 mm |
Cam, cranked
Part Number | Length | ||
---|---|---|---|
c) | 200-5507.00-00045 | 45 mm | |
c) | 200-5507.00-00060 | 60 mm |
Accessories
- d)1-102 Cams L35/45 Steel
- d)1-262 Cams variable
- e)200-0902.00-00000 Flat external seal Ø17mm / 22mm
16 other products in the same category:
×