C6 Remote I/O
Characteristics
Brand:
Item number:
see title
- Consistent EtherCAT I/O system in real time
- Compact design (32 DI on 25 mm)
- Extensive selection of I/O module types
- Pluggable terminals and modules
- Large selection of products
- Stockable & individual orders
- Permanently low and transparent prices
The C6 Remote I/O system from KEB offers various options for connecting process signals in an EtherCAT network. It consists of the C6 Remote I/O bus coupler and other I/O module types. The C6 Remote I/O bus coupler converts the transmission physics and generates the system voltages for the modules. The EtherCAT protocol is retained right down to the last I/O module: The modules each work in the system as an independent EtherCAT slave. Like every EtherCAT slave, they can be individually configured as participants. In addition, the data is available in EtherCAT without delay and does not need to be converted by a proprietary bus. At the end of the modular device, the connection between the outward and return lines is automatically closed so that the next EtherCAT device can be connected to the second port of the bus coupler or extender.
With a width of just 25 mm, the pluggable system meets a high packing density. Thanks to the diverse possibilities of the modules and the continuity of the EtherCAT fieldbus, a wide variety of application-specific topologies can be implemented.
| Fieldbus | EtherCAT 100 Mbits/s |
|---|---|
| W x H x D | 25 x 120 x 90 mm |
| Mounting | 35 mm DIN rail |
| Controller | ET 1100 |
| E-bus connection: | 10-pin system plug in the side wall |
| End module | not necessary |
| Power supply | 24 V DC (-20% … +25%) |
| Potential isolation | between modules and the bus |
| Operating temperature | 0 … +55 °C |
| Storage temperature | -25 … +70 °C |
| Relative humidity | 5 … 95%, without condensation |
| Protection class | IP 20 |
| Interference immunity | zone B according to EN 61131-2 |
